32GFC SW 100m Transceiver For Storage Area Network
Description
This 32GFC SW Transceivers are designed for 8G/16G/32G Fibre Channel (8GFC/16GFC/32GFC) short reach applications.
Featured with a reliable 850nm VCSEL laser transmitter, a high sensitive PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit, a max reach can up to 70m using OM3 fiber and 100m using OM4.All modules satisfy class I laser safety requirements. It is with the SFP+ 20-pin connector to allow hot plug capability.
This 32G FC SW are compliant with FC-PI-6, SFF-8472 Rev 12.2, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1.
Specification
| Form Factor |
SFP28 |
Max Data Rate |
28.05Gbps |
| Typical Wavelength |
850nm |
Max Transmission |
100m |
| Connector Type |
Dual LC |
Media Type |
MMF |
| Transmitter Type |
VCSEL 850nm |
Receiver Type |
PIN |
| TX Power |
-8.4~2.4dBm |
Receiver Sensitivity |
<-10dBm |
| Extinction Ratio |
>2.0 dB |
Overload |
> 2.4 dBm |
| Operating Temperature |
0 to 70°C (32 to 158°F) |
Warranty Time |
3 Years |
| DDMI |
Supported |
Protocols |
MSA Compliant |
| Power Consumption |
<1W |
OEM |
Supported |
Features
- Hot-pluggable SFP28 form factor transceiver module
- Data rate up to 28.05Gbps
- Compliant with SFP28 MSA and 32GFC
- Compliant with 16G and 8G Fibre Channel
- 850nm VCSEL laser and PIN photo-detector
- Internal CDR on both transmitter and receiver channels
- Reach up to 70m/100m over OM3/OM4 MMF
- Duplex LC receptacles
- Power consumption < 1W
- Commercial case temperature range: 0℃ to 70℃
- Built-in digital diagnostic functions
- Single 3.3V power supply
- RoHS 6 compliant
Application
- Tri-Rate 8.5/14.025/28.05Gb/s Fibre Channel
- 25G Ethernet
Optical and Electrical Characteristics
| Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
| Transmitter |
| Centre Wavelength |
λc |
840 |
850 |
860 |
nm |
|
| Spectral Width (RMS) |
Δλ |
|
|
0.6 |
nm |
|
| Side-Mode Suppression Ratio |
SMSR |
- |
- |
- |
dB |
|
| Average Output Power |
Pout |
-8.4 |
|
2.4 |
dBm |
1 |
| Extinction Ratio |
ER |
2.0 |
|
|
dB |
|
| Data Input Swing Differential |
VIN |
180 |
|
950 |
mV |
2 |
| Input Differential Impedance |
ZIN |
90 |
100 |
110 |
Ω |
|
|
TX Disable
|
Disable |
|
2.0 |
|
Vcc |
V |
|
| Enable |
|
0 |
|
0.8 |
V |
|
|
TX Fault
|
Fault |
|
2.0 |
|
Vcc |
V |
|
| Normal |
|
0 |
|
0.8 |
V |
|
| Receiver |
| Centre Wavelength |
λc |
840 |
850 |
860 |
nm |
|
| Receiver Sensitivity |
|
|
|
-10 |
dBm |
3 |
| Receiver Overload |
|
2.4 |
|
|
dBm |
3 |
| LOS De-Assert |
LOSD |
|
|
-13 |
dBm |
|
| LOS Assert |
LOSA |
-30 |
|
|
dBm |
|
| LOS Hysteresis |
|
0.5 |
|
4 |
dB |
|
| Data Output Swing Differential |
Vout |
500 |
700 |
900 |
mV |
4 |
|
LOS
|
High |
2.0 |
|
Vcc |
V |
|
| Low |
|
|
0.8 |
V |
|
Notes:
1. The optical power is launched into MMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 231-1 test pattern @28.05Gbps, BER ≤1E-6..
4. Internally AC-coupled.
Compatibility
Gigaopto's optical transceivers are 100% compatible with all major switch brands and will not cause damage to OEM devices.
In order to ensure the quality and compatibility of our products, each product is carefully tested on the corresponding equipment before delivery to customers.
For this GTS-L08B2-02DC compatibility, please refer to the P/N correspondence table. If the brand and part number you are looking for is not listed below, please let us know and we will be delighted to provide you with more details.
| Corresponding Compatible Brand/Part Number |
| Brand |
Part Number |
Brand |
Part Number |
| Gigaopto |
GTS-L08B2-02DC |
QLogic |
SFP32-SR-SP-C |
| Cisco |
DS-SFP-FC32G-SW |
Brocade |
XBR-000212 |
Product Tags:
|
|
32G Fiber Channel Short Wavelength 32GFC SW 850nm SFP28 Transceiver Module 100m LC DOM Images
|
